HOW TO REMOVE MICRO SD MEMORY CARD PASSWORD.

MICRO SD Memory Card Password Recovery / removing 4 methods. 

Solution 1:

For Symbian Mobiles:
1. Download and Install  FExplorer
2. Insert your card into your phone, without accessing it through the phone
3. Run FExplorer and Open the path C:system
4. Find the file called mmcstore, and rename it mmcstore.txt
5. Copy that file (mmcstore.txt) to your PC and open it in Notepad

6. Your password will be located within that file.

Solution 2:

For Symbian Mobiles:

1. Download and Instal X-Plore
2. Now open the X-Plore and press Zero(0) then check you have marked the
“Show the System Files”.
3. After you done the above step now go to the file:
C:/Sys/Data/Mmcstore
4. If you found the above path then press the option “3” to set the Hex-Viewer.
5.  Now look the third column you can see the code like ! TMSD02G (c ??”? x???3?3?3?3?3)
Now see the characters between ‘?’ because it is your password 33333.
6. You mayn’t able to access the path file:
C:/Sys/Data/Mmcstore
if you don’t set the password for the memory card.

Solution 3:

For Micro SD:
Put the card in any E series mobile or N95 etc and format it.
It will not ask for a password.

Solution 4:

1. Go to file manager on your mobile
2. In Settings choose system folders,
3. In the System folder, find a file called mmcstore
4. Send the file to your PC using IR/Bluetooth
5. Open the file in Notepad
6. The password you need for your memory card is located within that file

If you have any doubts please post a comment below.

99 COMMENTS

  1. Hey i have forgot the passward of my sandisk memory card. And there is no such file called mmcstore in my files . What to do????how can i recover my files???are there any fixed attempts of trying to enter passward

  2. pliz i don’t know how to delete my M-card password and have forgoten my P-word. Pliz help me out, am using Nokia 201

  3. Comment:Comment: I have A phone . My phone name is Nokia-E63 . today i insert a memory and i also switch on Encryption of memory option . i was also input a passpharse code . so Encryption is enable and also start and working it , but then i switch of my phone , then i was start the phone , the phone also start perfectly but memory cannot be used this message are seen

    Now My question is that How can i used memory again perfectly without formatting memory ???

    Plzzzzzzzzz help me plzzzzzzzzzz

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Table Of Contents

Read More

Suggested Post