Table Of Contents
Let’s look at some simple solutions to the ever-so-complex Pangu jailbreak forĀ iOSĀ 9
Pangu has released its Jailbreak tool for Apple’s new iOS version, iOS 9 – 9.0.2 however many users get stuck while jailbreaking their iPhones on few common errors. The tech forums are filled with queries fromĀ several users who encountered issues with the jailbreak forĀ iOSĀ 9 and the latest updates. Let’s look at some simple solutions to the ever-so-complex jailbreak forĀ iOSĀ 9 and later:
Unsuccessful Attempts To Jailbreak
If you have been unable to jailbreak your iOSĀ 9 device after multiple attempts,Ā PanguĀ suggests that you try the following steps:-
- Enable āAirplane Modeā and try again
- Reboot both your computer system, and yourĀ iOSĀ device, and try again
- Restore yourĀ iOSĀ device, preferably through theĀ PanguĀ restore functionality, and have another go at it
DisablingĀ passcode, Touch ID, and Find myĀ iPhoneĀ might also help you in your attempts to jailbreak yourĀ iOSĀ device.
Environment Error Code: 45% Error
A common error several users encounter during their attempt to jailbreak theirĀ iOSĀ 9 devices is that the process gets stuck at 45% with an Environment Error Code (0A error). Courtesy of a user, si709, you can resolve this issue by disabling Encrypted Backup of yourĀ iOSĀ 9 device throughĀ iTunes. This issue is caused due to the encrypted backup throughĀ iTunes.
CydiaĀ App Not Available
If you cannot find theĀ CydiaĀ app afterĀ jailbreakingĀ yourĀ iOSĀ device, there is a simple fix. Open the Photos app on your device, and then run theĀ PanguĀ app. This should solve this issue, and you should be able to use theĀ CydiaĀ app.
Getting Stuck At 90%
Some users have found that their jailbreak process gets stuck at 90%. We know it frustrates the most when the process gets stuck just when itās about to complete. If you encounter this issue, restart the jailbreak process, and when you are prompted to open theĀ PanguĀ app, open the Photos app instead, and then open theĀ PanguĀ app. Donāt close the Photos app afterwards and this should do it for you.
PanguĀ Start Button Disabled
You might find the Start button greyed out at the very beginning of the jailbreak process, where it prompts to connect theĀ iOSĀ device and press Start, then install iTunes on your system. After installation, simply disconnect and reconnect yourĀ iOSĀ device to your computer system. This should solve the issue.
These are some of the common issues with theĀ iOSĀ 9 jailbreak and its fixes. We hope this guide helped you effectively overcome any issues. Let us know in the comments what you think about this.
Source : Bidness